Transformer Silicon Steel Sheet Inserting Machine

• Customization: Available
• Function: Abrasion Resistance, Lubrication, High Temperature Resistance, Anti-Corrosion, Anti-Cold
• Demoulding: Manual
• Model NO.: EI28/EI35/EI48/EI60/EI72/EI84/EI96/EI128/EI133
• Condition: New
• Certification: RoHS, ISO, CE
• Warranty: 24 Months
• Automatic Grade: Semiautomatic
• Installation: Desktop
• Driven Type: Manual
• Daily Output: Ei Inserts: 800~1500 Pieces
• Transport Package: Paper Carton with Wooden Cases
• Trademark: Windoo
• Origin: China
• HS Code: 8479811000
• Production Capacity: 5000

Product Description

Transformer silicon steel sheet inserting machine

The Lamination Stacking Machine is a special machine for manufacturing transformers. It is suitable for manufacturing a large number of transformers, which greatly reduces the production cost. It is a labor-saving and reliable machine. suitable for low-frequency transformer silicon steel inserts
1. The internal parts of this machine are made of materials imported from Japan. After special treatment, there is less wear, less failure, easy operation, long life, and easy replacement of parts.
2. The handwheel is made of special rotating parts, the handwheel is smooth and convenient, and the shape is beautiful. The electric also has a handwheel
3. It can ensure the requirement of stacking thickness, and make the inserted silicon steel sheet compact, without manual patching.
4. Can insert 0.30 to 0.5 thick silicon steel sheet and second-hand neatly annealed sheet and pin frame
5. The film feeding speed is not less than 120 groups/min (one E piece plus one I piece).
6. Daily output: EI inserts: 800~1500 pieces, E inserts: 2500~3500 pieces.
7. Refined from special steel, wear-resistant, and easy to use low failure! long life!
8. Main models: EI-28, EI-35, EI-41, EI-48, EI-57, EI-66, EI-76.2, EI-85.8, EI-96, EI-105, EI-114, EI -133.2, EI-150
9. In addition, different types of inserts can be customized according to the different needs of customers.

Product Parameters

 

Model	A	B	Machine size	Package size	Net weight
EI28	28	23	410×170×300mm	410×170×300mm	13kg/19kg
EI35	35	29.5	440×130×290mm	550×240×330mm	15kg/21kg
EI41	41	33	440×130×290mm	550×240×330mm	15kg/21kg
EI48	48	40	480×140×290mm	550×240×330mm	15kg/21kg
EI57	57	47.5	540×150×290mm	630×260×380mm	15kg/22kg
EI60	60	50	650×125×350mm	680×155×380mm	16kg/23kg
EI66	66	55	560×160×340mm	630×260×380mm	17kg/25kg
EI76	76	63.5	600×170×360mm	840×330×440mm	28kg/38kg
EI86	86	71	700×180×380mm	840×260×400mm	34kg/43kg
EI96	96	80	810×190×380mm	840×260×400mm	37kg/47kg
EI105	105	87.5	870×175×380mm	900×205×410mm	42kg/52kg
EI114	114	95	870×205×280mm	920×280×410mm	46kg/58kg
EI133	133	111	950×270×370mm	1000×320×420mm	47.5kg

Features of EI type chip inserter:
• Ø This product is made of imported steel, with special treatment and precision machining, less wear, less failure, easy operation, long service life, and easy replacement of accessories.
• Ø The E piece is not pulled upside down, and the I piece is smooth (0.35 and 0.5 pieces are applicable). The accessories wear little and the work efficiency is high.
• Ø In addition to using E1 sheets of different thicknesses, the chip inserter does not need any adjustment and replacement of accessories;
• Ø E-type and I-type are inserted into the coil shaft at intervals one by one.
• Ø Regular EI-28 to EI-192.
• Ø Other specifications can be customized according to customer requirements, customers only need to provide silicon steel sheets and skeletons.
 
The operation method of EI type chip inserter:
1. Put the silicon steel sheet into the charging trough, put the burr down, the silicon steel sheet with too thick burr and the uneven sheet, turn the hand wheel manually, and take out the first I sheet pushed out from left to right.
2. Put the wound product skeleton balance on the debugged frame thimble.

Warm Reminding:
The EI sheet can be completely and neatly inserted into the coil frame; In addition to using EI sheets of different thicknesses, the machine does not need any adjustment or replacement of accessories:
The EI piece can be stored in the inserter first, and the E piece and then I piece are inserted between the skeletons one by one. , super large and special specifications products can be customized.

How to use and maintain the EI type inserter:
1. Before using the chip inserter, manually turn the handwheel to check whether there are iron chips and sundries in the movable plate and the charging trough, and only after the air pipe is blown clean can the chip be inserted. If there is a card, it should be stopped immediately to discharge the fault before continuing to use, so as not to damage the frame and the parts of the inserter.
2. If it is not used for a long time, take out the remaining silicon steel sheet, blow it clean with the air pipe, and then spray it with anti-rust oil on the rotating part of the whole machine. If possible, wrap it with a stretch film.

Function and feature:
Selection of the best and high-quality steel, and imported bearings, the machine is more stable and durable.


Why choose us?
1. Environmental protection, low noise, and high efficiency;
2. The storage capacity can be super large.
3. You can choose different row directions, winding angles, and sectional angles.
4. Photoelectric induction switch technology has high accuracy and an accurate number of rings.
5. Stepper motor wiring and spacing can be accurately controlled;
6. Products that can be tetragonal.

Packaging & Shipping

Packaging & Shipping

General package(Paper carton or plastic bag): For small goods, Package it with form and pack paper to guarantee unbroken during the transport.
Wooden case package: For larger scale goods such as machine equipment etc, we have a special skilled carpenter, who would make the proper wooden case with exact thickness, density, and length. The up arrow ↑marked on the outer wooden case. Buffer material would be put in the wooden case to prevent cracks and shock. We will inform you of the delivery note. You just need to wait for a phone call, then pick up the goods at the nearest logistic station. (Please let me know in advance if you want to get the goods at home.)
Shipping:
A. 3-5 workdays shipping from China by Air/Express(DHL, FedEx, UPS, EMS, etc.)
B. 3-5 workdays shipping from UK Warehouse to European union countries.No need to pay for customs duties and VAT.
C. 25-30 workdays shipping from China to Russian customers. No need to pay for customs duties and VAT.
D. We can arrange shipment by sea. Minium CBM requirement : 1 CBM

After Sales Service

Service

1. We provide you with a friendly English User manual or operating videos for free.
2.24 hours of technical support by email or call.
3. Warranty: 1 year free, 2-3 years cost price, and free technical support always.
4. Free training to make sure you master the operation of our products.
5. OEM/ODM accept. But the MOQ of OEM/ODM is 100 sets.
Service tenet
Provide you the best service with "fast + satisfactory + safe".
Warranty period:
12 months long after the user received the product.