Automatic Motor Coil Winder Enameled Wire Wire Winding Machine

• Customization: Available
• Voltage: 220V
• Warranty: 1 Year
• Model NO.: WD800W
• Shell Material: Steel
• Control Mode: PLC Control
• Motor Power: 800W AC
• Speed: 470 Rpm, Stepless Speed Regulatio
• Steering: Forward Reverse
• Applicable Coil Winding Range: Suitable for Motor Coil Winding Below 90kw
• Weight: 13kg
• Size: 300*300*400mm
• Transport Package: Paper Carton with Wooden Cases
• Specification: WD800
• Origin: China
• HS Code: 84798110
• Production Capacity: 30000
• Package Size: 40.00cm * 30.00cm * 30.00cm
• Package Gross Weight: 40.000kg

Product Description

Automatic Motor Coil Winder Enameled Wire Wire Winding Machine

This machine is suitable for electrical appliances, instrument industry, winding various inductance coils, instrument coils, relays, timers, home appliances, low-voltage electrical appliances, and various flat-wound coils, especially for transformers, motors, water pump coils, and other multi-winding coils .

The power is 800w, the speed is 470 rpm, and the speed can be adjusted steplessly, with reverse rotation, and the reverse button can be directly activated during the forward rotation process. The machine will then run in reverse. Up to 20 circuits can be set up to 999 turns. The enameled wire products are suitable for motor coils within 90KW. The upper limit is determined according to the customer's wire mold and wire diameter.

CNC Winding Machine Model	800W
Shell material	Refined Steel
Control mode	PLC control
Operation Panel	In English Version
Motor power	800W AC
Speed 470 rpm rounds	Stepless speed regulation
Steering	Forward Reverse
Number of Roads	20 Roads
Laps	999 laps
Size	300*300*400mm
Weight	13kgs
Usage	Motor production or maintenance
Applicable coil winding range	suitable for motor coil winding below 90kw

 

Install:
1. The machine should be installed on a sturdy wooden workbench. A black rubber sheet should be placed between the workbench and the bottom plate of the winding machine, which is convenient to reduce the vibration of the winding machine. The bottom plate of the winding machine has 4 fixing holes for Fixed installation.

2. Install the winding machine with the wire sleeve shaft on the main shaft of the winding machine, and tighten the fixing screws. Once again, it is prompted to tighten the screws. Normally check whether the winding sleeve shaft is loose or bent. The winding shaft should be kept concentric during operation.