Motor Winding Magnet Wire Used Double Layer Fiberglass Covered Round Copper Wire

• Insulation Level: B
• Certification: ISO9001, RoHS
• Application: Transformer, Instrument, Electrical Equipment, Motor
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: GLEB
• Shape: Round Wire
• Conductor Material: Copper Wire
• Transport Package: Pallet
• Specification: 1.00-6.00
• Trademark: windoo
• Origin: China
• HS Code: 85441100
• Production Capacity: 2500t/Year
• Package Size: 50.00cm * 50.00cm * 40.00cm
• Package Gross Weight: 60.000kg

Product Description

The glass fiber coated polyimide film wire is a high-quality copper (aluminum) wire wrapped with a polyimide film, and then a single or double glass fiber, and is equipped with an insulating varnish of the required temperature resistance index for immersion and baking treatment to make the glass fiber. Between, the glass fiber, the film, and the conductor are bonded into a whole. The product has voltage breakdown resistance, with temperature resistance levels of 155, 180, 200 thermal class.

Executive standard: GB/T 7672-2008

Product range:

Copper/aluminum flat wire

Dimension of narrow side a: 0.30-5.60mm

Wide side size b: 2.00-16.00mm

Round copper/aluminum wire

Diameter size: Φ1.7-Φ6.0mm

Special size beyond this scope, just contact with us freely.

Name	Insulation Thickness(mm)	Torelance (mm)	Min Breakdown Voltage /V
Glass fiber coated round copper wire	0.20	±15%	2500
	0.30	-15%
	0.40		5000
	0.50
	0.60
	0.70		6000
	0.80
	0.90

Material of Glass-fiber coated Polyimide Film Wire:

The flat aluminum wire should meet the requirements of GB5584.3-2009, and the resistivity at 20°C should not be greater than 0.0280Ωmm2/m

The rectangular copper wire shall comply with GB5584.2-2009, and the resistivity at 20°C shall not be greater than 0.01724Ωmm2/m

The insulation thickness and breakdown voltage should meet the requirements in the following table, or be determined by us and the buyer through negotiation. The insulation thickness (B-b) on the narrow side is not assessed.