Manual Transformer silicon steel sheet inserting machine
Iron core inserting machine/ Semi-automatic chip inserter
The iron core inserting machine can be divided into two types: manual and electric. It is a special machine for manufacturing transformers. The internal parts of this machine are made of imported materials from Japan. After special treatment, the wear is less, the mechanism is perfect, the failure is low, the operation is easy, the service life is long. and the parts are easy to replace. The external parts are made of high-quality steel of national standard, and the surface is electroplated with hard chrome to increase the hardness of the body, and it is not easy to rust. The base is sky blue lacquered. Our company has stock 28-133 for a long time. For special specifications, you only need to send a few iron cores. We will design the machine you need for you soon. One machine 0.35/0.5 can be adjusted freely.
Product Parameters
Iron core inserting machine/ Semi-automatic chip inserter
| Model |
Semi-automatic chip inserter |
| Power |
220V50HZ AC |
| Loading Height |
E I single side 150mm |
| Inverter |
0.75KW T-VERTER |
| Speed |
0-300RPM adjustable |
| Slider |
Linear guide EG20 with silver color |
| Skeleton Positioning |
linear guide EG12 with silver color |
| Iron, middle rail |
hook CR12 heat treatment |
| Vertical bars |
45# steel heat treatment |
| Geared motor |
220V 750W AC motor 1:5 Wilco |
| Outer dimension |
L1700*W800*H1200 mm |
| Thickness range of inserts |
adjustable from 45-130mm |
| Weight |
12 ~350Kg |
Detailed Photos
Features of EI type chip inserter:
• Ø This product is made of imported steel, with special treatment and precision machining, less wear, less failure, easy operation, long service life, and easy replacement of accessories.
• Ø The E piece is not pulled upside down, and the I piece is smooth (0.35 and 0.5 pieces are applicable). The accessories wear little and the work efficiency is high.
• Ø In addition to using E1 sheets of different thicknesses, the chip inserter does not need any adjustment and replacement of accessories;
• Ø E-type and I-type are inserted into the coil shaft at intervals one by one.
• Ø Regular EI-28 to EI-192.
• Ø Other specifications can be customized according to customer requirements, customers only need to provide silicon steel sheets and skeletons.
How to use and maintain the EI type inserter:
1. Before using the chip inserter, manually turn the handwheel to check whether there are iron chips and sundries in the movable plate and the charging trough, and only after the air pipe is blown clean can the chip be inserted. If there is a card, it should be stopped immediately to discharge the fault before continuing to use, so as not to damage the frame and the parts of the inserter.
2. If it is not used for a long time, take out the remaining silicon steel sheet, blow it clean with the air pipe, and then spray it with anti-rust oil on the rotating part of the whole machine. If possible, wrap it with a stretch film.
Why choose us?
1. Environmental protection, low noise, and high efficiency;
2. The storage capacity can be super large.
3. You can choose different row directions, winding angles, and sectional angles.
4. Photoelectric induction switch technology has high accuracy and an accurate number of rings.
5. Stepper motor wiring and spacing can be accurately controlled;
6. Products that can be tetragonal.
Packaging & Shipping
Packaging & Shipping
General package(Paper carton or plastic bag): For small goods, Package it with form and pack paper to guarantee unbroken during the transport.
Wooden case package: For larger scale goods such as machine equipment etc, we have a special skilled carpenter, who would make the proper wooden case with exact thickness, density, and length. The up arrow ↑marked on the outer wooden case. Buffer material would be put in the wooden case to prevent cracks and shock. We will inform you of the delivery note. You just need to wait for a phone call, then pick up the goods at the nearest logistic station. (Please let me know in advance if you want to get the goods at home.)
Shipping:
A. 3-5 workdays shipping from China by Air/Express(DHL, FedEx, UPS, EMS, etc.)
B. 3-5 workdays shipping from UK Warehouse to European union countries.No need to pay for customs duties and VAT.
C. 25-30 workdays shipping from China to Russian customers. No need to pay for customs duties and VAT.
D. We can arrange shipment by sea. Minium CBM requirement : 1 CBM
){kind=link}
){kind=link}