Manual Ei 48 Transformer Core Filling Machine/ Ei Stacking Machine

• Customization: Available
• Function: Abrasion Resistance, Lubrication, High Temperature Resistance, Anti-Corrosion, Anti-Cold
• Demoulding: Manual
• Model NO.: wd
• Condition: New
• Certification: RoHS, ISO, CE
• Warranty: 24 Months
• Automatic Grade: Semiautomatic
• Installation: Desktop
• Driven Type: Manual
• Daily Output: Ei Thickness:0.35mm or 0.50mm
• Ei Shape,: 14,18,24--28,133,156,204,
• Working Way: Manual by Hand
• Machine Material: Nickel-Chromium Mixtures
• Feature: Easy to Use, Easy to Upkeep
• Using Time: ≥20years
• Transport Package: Paper Carton with Wooden Cases
• Trademark: Windoo
• Origin: China
• HS Code: 8479811000
• Production Capacity: 5000
• Package Size: 100.00cm * 32.00cm * 42.00cm
• Package Gross Weight: 47.500kg

Product Description

Semi-automatic EI chip inserter Stacking Machine For Transformer

Stacking machine For electronic transformer industry chip inserter, common specifications are:
El series inserting machine (low-frequency transformer, power supply transformer, meter transformer, etc.) EI single-sided stacking insert (argon arc welding products)
E-piece stacking plug (electromagnet PFC, transformer, etc.), pneumatic single-push chip machine EE plug-in, common in 14.16.19 and other models El type 2/3-chip whole-stack plug-in EI three-phase transformer plug-in UI plug Chip machine
El series double insert manual/electric inserter



 

Product Parameters

 

Model	A	B	Machine size	Package size	Net weight
EI28	28	23	410×170×300mm	410×170×300mm	13kg/19kg
EI35	35	29.5	440×130×290mm	550×240×330mm	15kg/21kg
EI41	41	33	440×130×290mm	550×240×330mm	15kg/21kg
EI48	48	40	480×140×290mm	550×240×330mm	15kg/21kg
EI57	57	47.5	540×150×290mm	630×260×380mm	15kg/22kg
EI60	60	50	650×125×350mm	680×155×380mm	16kg/23kg
EI66	66	55	560×160×340mm	630×260×380mm	17kg/25kg
EI76	76	63.5	600×170×360mm	840×330×440mm	28kg/38kg
EI86	86	71	700×180×380mm	840×260×400mm	34kg/43kg
EI96	96	80	810×190×380mm	840×260×400mm	37kg/47kg
EI105	105	87.5	870×175×380mm	900×205×410mm	42kg/52kg
EI114	114	95	870×205×280mm	920×280×410mm	46kg/58kg
EI133	133	111	950×270×370mm	1000×320×420mm	47.5kg

Application
1. Suitable for low-frequency transformer silicon steel sheet inserts,
2. Main models: EI-28, EI-35, EI-41, EI-48, EI-57, EI-66, EI-76.2, EI-85.8, EI-96, EI-105, EI-114, EI -133.2, EI-150
Models can be customized according to customers: EI-24, EI-30, EI-32, EI-36, EI-38.4, EI-42, EI-54, EI-60, EI-74, EI-78, etc.
3. Silicon steel sheet 0.35-0.5mm is universal and can be realized by adjustment!
4. EI-28--66 type comes standard with one 3mm, 4mm L-shaped wrench each, and 2 I negatives (equipment accessories)
5. Special steel special rotating parts, strong wear resistance, smooth hand wheel feel, high precision, can be inserted into annealed silicon steel sheet.

Detailed Photos

Features of EI type chip inserter:
• Ø This product is made of imported steel, with special treatment and precision machining, less wear, less failure, easy operation, long service life, and easy replacement of accessories.
• Ø The E piece is not pulled upside down, and the I piece is smooth (0.35 and 0.5 pieces are applicable). The accessories wear little and the work efficiency is high.
• Ø In addition to using E1 sheets of different thicknesses, the chip inserter does not need any adjustment and replacement of accessories;
• Ø E-type and I-type are inserted into the coil shaft at intervals one by one.
• Ø Regular EI-28 to EI-192.
• Ø Other specifications can be customized according to customer requirements, customers only need to provide silicon steel sheets and skeletons.
 
The operation method of EI type chip inserter:
1. Put the silicon steel sheet into the charging trough, put the burr down, the silicon steel sheet with too thick burr and the uneven sheet, turn the hand wheel manually, and take out the first I sheet pushed out from left to right.
2. Put the wound product skeleton balance on the debugged frame thimble.

How to use and maintain the EI type inserter:
1. Before using the chip inserter, manually turn the handwheel to check whether there are iron chips and sundries in the movable plate and the charging trough, and only after the air pipe is blown clean can the chip be inserted. If there is a card, it should be stopped immediately to discharge the fault before continuing to use, so as not to damage the frame and the parts of the inserter.
2. If it is not used for a long time, take out the remaining silicon steel sheet, blow it clean with the air pipe, and then spray it with anti-rust oil on the rotating part of the whole machine. If possible, wrap it with a stretch film.

Why choose us?
1. Environmental protection, low noise, and high efficiency;
2. The storage capacity can be super large.
3. You can choose different row directions, winding angles, and sectional angles.
4. Photoelectric induction switch technology has high accuracy and an accurate number of rings.
5. Stepper motor wiring and spacing can be accurately controlled;
6. Products that can be tetragonal.

Packaging & Shipping

Packaging & Shipping

General package(Paper carton or plastic bag): For small goods, Package it with form and pack paper to guarantee unbroken during the transport.
Wooden case package: For larger scale goods such as machine equipment etc, we have a special skilled carpenter, who would make the proper wooden case with exact thickness, density, and length. The up arrow ↑marked on the outer wooden case. Buffer material would be put in the wooden case to prevent cracks and shock. We will inform you of the delivery note. You just need to wait for a phone call, then pick up the goods at the nearest logistic station. (Please let me know in advance if you want to get the goods at home.)
Shipping:
A. 3-5 workdays shipping from China by Air/Express(DHL, FedEx, UPS, EMS, etc.)
B. 3-5 workdays shipping from UK Warehouse to European union countries.No need to pay for customs duties and VAT.
C. 25-30 workdays shipping from China to Russian customers. No need to pay for customs duties and VAT.
D. We can arrange shipment by sea. Minium CBM requirement : 1 CBM

After Sales Service

Service

1. We provide you with a friendly English User manual or operating videos for free.
2.24 hours of technical support by email or call.
3. Warranty: 1 year free, 2-3 years cost price, and free technical support always.
4. Free training to make sure you master the operation of our products.
5. OEM/ODM accept. But the MOQ of OEM/ODM is 100 sets.
Service tenet
Provide you the best service with "fast + satisfactory + safe".
Warranty period:
12 months long after the user received the product.