Desktop enameled wire stripping machine multiphase transformer scraping paint tools
Product introduction
WDB-6 type enameled wire stripping machine adopts super hard material high-speed stripping cutter head, which can completely remove any hard insulating paint, enamel paint, etc. on the wire surface without damaging the copper wire itself. It is especially suitable for the situation where the paint needs to be stripped to the bottom of the coil, and the operation is convenient and the effect is good. Stripping paint is quick and safe without serious contamination and hazards.
Technical parameters
Machine Model: WDB-6
Applicable wire diameter: 0.35-4.0mm
Machine size: 250x150x150mm
Use voltage: 220V/50HZ
Motor power: 120W
Machine weight: 5.5KG
Optional accessories: Cylindrical cutter head
Stripping length: 4-65mm
The paint stripping cutter head of this machine is made of a high-quality imported alloy rod, which has the characteristics of wear resistance, easy slag removal, and easy maintenance.
1. The principle of knife edge is centripetal point cutting and adjustable taper. And the unique design of convenient and fast chip removal.
2. Combined with disassembly, easy adjustment, and flexible use of safety guards as the basis, we can truly achieve what the user thinks and what the user is anxious about.
Installation and use:
Select a suitable cutter head, install it on the chuck at the front end of the machine, insert an enameled wire in the middle of the cutter head, and use a fixed wrench to adjust the chuck so that the cutter head gently clamps the enameled wire, then withdraw the enameled wire and start the switch After that, hold the coil part by hand and push the enameled wire into the high-speed rotating cutter head easily until it reaches the preset.
Set the length of scraping paint, then carefully withdraw the enameled wire, and the paint stripping work can be completed. When necessary, the diameter of the cutter head can be adjusted by loosening and tightening the chuck, and the control can achieve the ideal paint stripping effect, because when the machine is running.
When the cutter head rotates at a high speed, the insulating paint or oxide of the enameled wire is cut off, and the surface of the enameled wire after peeling the paint is bright and clean.
To set the required paint stripping length, you can loosen the fixing screw of the collet. After exiting the collet, you will see the limit thimble of the stripping length. Adjust the limit thimble through the fixing screw to set and control the stripping of the enameled wire length.
Why choose us?
1. Environmental protection, low noise, and high efficiency;
2. The storage capacity can be super large.
3. You can choose different row directions, winding angles, and sectional angles.
4. Photoelectric induction switch technology has high accuracy and an accurate number of rings.
5. Stepper motor wiring and spacing can be accurately controlled;
6. Products that can be tetragonal.
After Sales Service
1. We provide you with a friendly English User manual or operating videos for free.
2.24 hours of technical support by email or call.
3. Warranty: 1 year free, 2-3 years cost price, and free technical support always.
4. Free training to make sure you master the operation of our products.
5. OEM/ODM accept. But the MOQ of OEM/ODM is 100 sets.
Packaging & Shipping
General package(Paper carton or plastic bag): For small goods, Package it with form and pack paper to guarantee unbroken during the transport.
){kind=link}