0.3-2.5mm 50Hz Enameled Copper Wire Stripping Machine

• After-sales Service: 7*24h
• Function: Abrasion Resistance, Lubrication, High Temperature Resistance, Anti-Corrosion, Anti-Cold
• Condition: New
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Certification: RoHS, ISO, CE
• Warranty: 12 Months
• Automatic Grade: Automatic
• Driven Type: Electric
• Scratchable Wire Diameter Range: 0.3-2.5mm
• Scratchable Length Range: 1-50mm
• Power Supply: AC220V\50Hz
• Speed Mode: 0-10000 Rpm\Min
• Weight(Kg): 0.7kg
• Transport Package: Paper Carton with Wooden Cases
• Trademark: Windoo
• Origin: China
• HS Code: 8479811000
• Production Capacity: 5000
• Package Size: 27.00cm * 15.00cm * 18.00cm
• Package Gross Weight: 2.000kg

Product Description

0.3-2.5mm 50HZ Enameled Copper Wire Stripping Machine 

Product introduction
The hand-held paint scraping machine scrapes paint by rotating the knife, suitable for 0.3-2.5mm enameled wire, and the scrapable length is 1.0-50.0mm. According to the thickness of the wire, adjust the speed of the blade. The thinner the wire diameter, the lower the speed; the thicker the wire diameter, the higher the speed, until it scrapes off.


Six-speed stepless speed regulation
Adapt to various wire diameters in the range of 0.35-3.25mm, and the stripping speed is more flexible

Transparent PP material
Transparent and clear, easy to operate, white nylon material, hard and not easy to crack, prevent paint powder from flying
long-lasting
The three-claw cutter head is made of tungsten steel welded floor to the handle, and uses different enameled wires to run at high strength

Shockproof
The sealing impact enameled wire adopts 99.99% pure copper wire excellent bearing, which makes the rotor run more smoothly and has a long life.
Technical parameters
Dimensions: 250*50*50mm
Weight: 0.7kg
Power supply: AC220V\50HZ
Applicable wire diameter: 0.3-2.5mm single
Stripping length: 1-50mm
Speed: 0-10000 rpm\min

Advantage
1. It can easily and quickly scrape the insulating paint film on the surface of various enameled wires without damaging the substrate. Its performance is superior to traditional manual knife scraping, grinding wheel sandpaper grinding, and potion corrosion. And significantly improve the welding quality.

2. It has the remarkable characteristics of fast paint scraping, high efficiency, simple operation, convenient installation, stable quality of the whole machine, low failure rate, high production efficiency, and novel design.

3. It is a paint scraping tool for the coil manufacturing and maintenance industries of motors, appliances, meters, transformers, electronics, household appliances, and power tools.

Operation method
1. Insert the end of the enameled wire to be scraped into the center of the knife holder, press the power start switch (handheld) or the pedal governor (fixed), and the motor will rotate immediately.
2. Move the enameled wire in the opposite direction of the axial direction until the end of the enameled wire, then the paint film can be scraped off.
3. Release the power button switch (handheld) or loosen the governor (fixed).
4. To replace the work, repeat the above steps.

Wire diameter adjustment and related matters
1. Within half a year of the motor part of this product, due to the reasons of the product itself, three guarantees are implemented for the quality. After long-term use of brushes and blades, when users need to replace them, they can contact our company for replacement, charge the cost of production and mail them on their behalf.
2. When scraping the paint to the end of the enameled wire, the end should not be separated from the three blades immediately, and the intersection of the cutting edges should wait for the cutter to stop rotating before disengaging, so as to avoid the enameled wire suddenly breaking away from the cutting edge and damaging the cutting edge when rotating.
3. Before the enameled wire is scratched, it must be slightly straightened by hand to avoid the enameled wire being misaligned with the center of the cutting edge.
4. After a long time of use, in the case of no power supply, the safety cover can be unscrewed to remove the peeled paint film powder.