Lamination Stacking Machines for Interleaving Transformer

• Function: Abrasion Resistance, Lubrication, High Temperature Resistance, Anti-Corrosion, Anti-Cold
• Demoulding: Manual
• Condition: New
• Certification: RoHS, ISO, CE
• Warranty: 24 Months
• Automatic Grade: Semiautomatic
• Installation: Desktop
• Driven Type: Manual
• Daily Output: Ei Inserts: 800~1500 Pieces
• Transport Package: Paper Carton with Wooden Cases
• Trademark: Windoo
• Origin: China
• HS Code: 8479811000
• Production Capacity: 5000

Product Description

Lamination stacking machines for interleaving transformer

Stacking machine For electronic transformer industry chip inserter, common specifications are:
El series inserting machine (low-frequency transformer, power supply transformer, meter transformer, etc.) EI single-sided stacking insert (argon arc welding products)
E-piece stacking plug (electromagnet PFC, transformer, etc.), pneumatic single-push chip machine EE plug-in, common in 14.16.19 and other models El type 2/3-chip whole-stack plug-in EI three-phase transformer plug-in UI plug Chip machine
El series double insert manual/electric inserter



 

Product Parameters

 

Model	A	B	Machine size	Package size	Net weight
EI28	28	23	410×170×300mm	410×170×300mm	13kg/19kg
EI35	35	29.5	440×130×290mm	550×240×330mm	15kg/21kg
EI41	41	33	440×130×290mm	550×240×330mm	15kg/21kg
EI48	48	40	480×140×290mm	550×240×330mm	15kg/21kg
EI57	57	47.5	540×150×290mm	630×260×380mm	15kg/22kg
EI60	60	50	650×125×350mm	680×155×380mm	16kg/23kg
EI66	66	55	560×160×340mm	630×260×380mm	17kg/25kg
EI76	76	63.5	600×170×360mm	840×330×440mm	28kg/38kg
EI86	86	71	700×180×380mm	840×260×400mm	34kg/43kg
EI96	96	80	810×190×380mm	840×260×400mm	37kg/47kg
EI105	105	87.5	870×175×380mm	900×205×410mm	42kg/52kg
EI114	114	95	870×205×280mm	920×280×410mm	46kg/58kg
EI133	133	111	950×270×370mm	1000×320×420mm	47.5kg

Application
1. Suitable for low-frequency transformer silicon steel sheet inserts,
2. Main models: EI-28, EI-35, EI-41, EI-48, EI-57, EI-66, EI-76.2, EI-85.8, EI-96, EI-105, EI-114, EI -133.2, EI-150
Models can be customized according to customers: EI-24, EI-30, EI-32, EI-36, EI-38.4, EI-42, EI-54, EI-60, EI-74, EI-78, etc.
3. Silicon steel sheet 0.35-0.5mm is universal and can be realized by adjustment!
4. EI-28--66 type comes standard with one 3mm, 4mm L-shaped wrench each, and 2 I negatives (equipment accessories)
5. Special steel special rotating parts, strong wear resistance, smooth hand wheel feel, high precision, can be inserted into annealed silicon steel sheet.

Detailed Photos

The operation method of EI type chip inserter:
1. Put the silicon steel sheet into the charging trough, put the burr down, the silicon steel sheet with too thick burr and the uneven sheet, turn the hand wheel manually, and take out the first I sheet pushed out from left to right.
2. Put the wound product skeleton balance on the debugged frame thimble.

How to use and maintain the EI type inserter:
1. Before using the chip inserter, manually turn the handwheel to check whether there are iron chips and sundries in the movable plate and the charging trough, and only after the air pipe is blown clean can the chip be inserted. If there is a card, it should be stopped immediately to discharge the fault before continuing to use, so as not to damage the frame and the parts of the inserter.
2. If it is not used for a long time, take out the remaining silicon steel sheet, blow it clean with the air pipe, and then spray it with anti-rust oil on the rotating part of the whole machine. If possible, wrap it with a stretch film.
 

Our Advantages

Why choose us?

1. Environmental protection, low noise, and high efficiency;
2. The storage capacity can be super large.
3. You can choose different row directions, winding angles, and sectional angles.
4. Photoelectric induction switch technology has high accuracy and an accurate number of rings.
5. Stepper motor wiring and spacing can be accurately controlled;
6. Products that can be tetragonal.