350W Automatic Motor CNC Winding Machine High Torque AC 220V

• Customization: Available
• Voltage: 220V
• Warranty: 1 Year
• Model NO.: 350W
• Number of Spindles: 1 Sprindles
• Wire Diameter Range: 0-4.0mm (Thickness) 0-10mm (Width)
• Input Power: AC 220V/50Hz
• Winding Motor Power: AC1500W
• Winding Speed: 0-500 Rpm
• Machine Size: 1300*800*1250mm
• Transport Package: Woodne Cases
• Specification: L1000mm*W550mm*H400mm
• Trademark: Windoo/OEM
• Origin: China
• HS Code: 8544110000
• Production Capacity: 5000
• Package Size: 45.00cm * 42.00cm * 35.00cm
• Package Gross Weight: 50.000kg

Product Description

350w Automatic Motor CNC winding machine High torque AC 220V
This machine is an ideal computer programming model. It can set the number of winding turns from 1 to 10 at will. It is used to control and operate the winding equipment. It can continuously wind 1 to 10 groups of different turns on the same mold. The machine adopts advanced computer technology, inputs the winding and the number of turns to be wound through the keyboard, the winding and the number of turns are automatically displayed during winding, and it will automatically stop and brake when the preset number of turns is wound. The machine has the characteristics of scientific and novel design, stable performance, convenient operation, high efficiency, accurate counting, clear display, and reversible counting by hand.


Winding machine model: CNC winding machine - large torque - flat wire machine
Number of spindles: 1
Spindle diameter: 30mm
Control mode: CNC control
Maximum speed: 500rpm
Applicable wire diameter: 0-4.0mm (thickness) 0-10mm (width)
Line spacing: 0-9.99mm
Winding width: 400mm
Cable width: 200mm
Rotation diameter:
Spindle motor: AC1500W
Cable motor: stepper motor
Number of memory groups: 999
Working power supply: AC220V 50HZ
Scope of application: dry-type transformers, power transformers, welding machine transformers
Machine size: 1300*800*1250mm
Machine weight: 180kg


Coil Winding Machine Application
*Widely used in special products such as opening and closing transformers, current transformers, zero-sequence transformers, three-phase current transformers, ring inductors, etc.

Install
1. The machine should be installed on a sturdy wooden workbench. A black rubber sheet should be placed between the workbench and the bottom plate of the winding machine, which is convenient to reduce the vibration of the winding machine. The bottom plate of the winding machine has 4 fixing holes for Fixed installation.
2. Install the winding machine with the wire sleeve shaft on the main shaft of the winding machine, and tighten the fixing screws. Once again, it is prompted to tighten the screws. Normally check whether the winding sleeve shaft is loose or bent. The winding shaft should be kept concentric during operation.